Transmitter sensors

 



For measurement of relative and absolute pressure.

Series Comments Photos Technical sheet
CERAMIC CELL TECHNOLOGY – CTP-507 Use for gases or liquids.
- Measurement range from –15 to +8750 psi.
- Output signal 4-20 mA 2 wires / power supply 11-30 V.
- Construction in stainless steel with seal VITON (others on request).
- Connector DIN or cable.
- Setting of zero and sensibility.
- Fitting G1/4” or G1/2”.
- Accuracy : + 0,3 % EM
PDF
PIEZO RESISTIVE CELL TECHNOLOGY – CTP-680 Use for gases or liquids.
- Measurement range from 0+1.45 psi to 0+14500 psi.
- Output signal 4-20 mA 2 wires / power supply 9-33 V.
- Construction in stainless steel completely tight.
- Connector DIN, BINDER or LUMBERG 4 or 5 poles or cable.
- Setting by potentiometer (with connector DIN and LUMBERG).
- Great variety of connections such as G ¼", G ½", flush diaphragm ...
- High temperature type.
- Accuracy + 0,5, 0,25 or 0,1 % of EM.
PDF
CERAMIC CELL TECHNOLOGY – CTP-691 Use for gases or liquids.
- Measurement range from –14.5 to +8700 psi.
- Output signal 4-20 mA 2 wires / power supply 11-33 V.
- Construction in stainless steel with seal FPM/EPDM/NBR/MVQ/CR.
- Connector DIN, DIN ROND, cable.
- Setting of zero and sensibility on request.
- Fitting G1/4”, G1/2”, 1/4” NPT, 1/2” NPT, UNF 7/16.
- Accuracy + 0,3 %.
PDF
OTHER REALIZATIONS For level measurement of liquids even aggressive.
- Gauge from 1.45 psi.
- Output signal 4-20 mA 2 wires / power supply 9-33 V.
- Integrated setting at atmospheric pressure.
PDF

For measurement of differential pressures

Series Comments Photos Technical sheet
TECHNOLOGY BY FLEXIBLE BAR IN CERAMIC – CTPD-402 For control of light air flows in the field of air conditioning and to measure low pressures in the environmental and medical sectors.
- Utilization for air and neutral gases.
- Measurement range : 0, +0,044, +0.073, +0.15, +0.44, + 0.73 psi.
- Output signal 0,5 to 4,5 V / power supply 10,2 – 33 V.
- Polycarbonate/Polyamide construction and diaphragm in silicon rubber.
- Connector step of 2,5 mm (AMP DUOPLUG) or pins to be mounted on printing circuit.
- Ferrules for hoses diameter 6,2 mm.
- Fixing system by angle iron or plate.
- Accuracy : + 0,6 % EM
PDF
HALL EFFECT TECHNOLOGY – CTPD-652 For survey of level or flow in the field of heating and industrial process.
- Utilization for gases or liquids.
- Measurement range : 0, +0.73, +1.45, +2.9, +7.25, +1.45 psi.
- Output signal 4-20 mA 3 wires / Power supply 20-30 VDC or 24 VAC.
- Housing in anodised aluminium or brass with plastic cap.
- Diaphragm NBR or EPDM (viton or silicon on request).
- Connection on internal terminal with screws.
- Fixing system by angle iron (flat or perpendicular fixing).
- Accuracy : 1,5 % EM.
PDF
CERAMIC CELL TECHNOLOGY – CTPD-692 Due to wide variety, these sensors are suitable for most industrial applications.
- Utilization for gases or liquids.
- Measurement range : from 0 +1.45 psi to 0 +370 psi with admissible overload of 2 to 7,5 times the nominal pressure (according to EM).
- Output signal 4-20 mA 2 wires /power supply 11-33 V.
- Housing in stainless steel with fitting FPM / EPDM / NBR / MVQ / CR.
- Connector DIN, ROND 3 poles, cable.
- Ferrules for hoses or fittings to screw for tubes.
- Fixing system by angle iron.
- Accuracy : + 0,5 % EM.
PDF




Aérodrome de Lognes - 77185 LOGNES - FRANCE - Tél : +33 160 17 87 50 - Fax : +33 1 60 17 87 35 - email : info@gie-polytechnics.fr

Un site internet réalisé par l'Agence Digeetal