For measurement of relative and absolute pressure.
Series | Comments | Photos | Technical sheet |
CERAMIC CELL TECHNOLOGY – CTP-507 |
Use for gases or liquids.
Measurement range from –15 to +8750 psi.
Output signal 4-20 mA 2 wires / power supply 11-30 V.
Construction in stainless steel with seal VITON (others on request).
Connector DIN or cable.
Setting of zero and sensibility.
Fitting G1/4” or G1/2”.
Accuracy: + 0,3 % EM |
 |
PDF |
PIEZO RESISTIVE CELL TECHNOLOGY – CTP-680 |
Use for gases or liquids.
Measurement range from 0+1.45 psi to 0+14500 psi.
Output signal 4-20 mA 2 wires / power supply 9-33 V.
Construction in stainless steel completely tight.
Connector DIN, BINDER or LUMBERG 4 or 5 poles or cable.
Setting by potentiometer (with connector DIN and LUMBERG).
Great variety of connections such as G ¼", G ½", flush diaphragm ...
High temperature type.
Accuracy + 0,5, 0,25 or 0,1 % of EM. |
 |
PDF |
CERAMIC CELL TECHNOLOGY – CTP-691 |
Use for gases or liquids.
Measurement range from –14.5 to +8700 psi.
Output signal 4-20 mA 2 wires / power supply 11-33 V.
Construction in stainless steel with seal FPM/EPDM/NBR/MVQ/CR.
Connector DIN, DIN ROND, cable.
Setting of zero and sensibility on request.
Fitting G1/4”, G1/2”, 1/4” NPT, 1/2” NPT, UNF 7/16.
Accuracy + 0,3 %. |
 |
PDF |
OTHER REALIZATIONS |
For level measurement of liquids even aggressive.
Gauge from 1.45 psi.
Output signal 4-20 mA 2 wires / power supply 9-33 V.
Integrated setting at atmospheric pressure. |
 |
PDF |
For measurement of differential pressures
Series | Comments | Photos | Technical sheet |
TECHNOLOGY BY FLEXIBLE BAR IN CERAMIC – CTPD-402 |
For control of light air flows in the field of air conditioning and to measure low pressures in the environmental and medical sectors.
Utilization for air and neutral gases.
Measurement range: 0, +0,044, +0.073, +0.15, +0.44, + 0.73 psi.
Output signal 0,5 to 4,5 V / power supply 10,2 – 33 V.
Polycarbonate/Polyamide construction and diaphragm in silicon rubber.
Connector step of 2,5 mm (AMP DUOPLUG) or pins to be mounted on printing circuit.
Ferrules for hoses diameter 6,2 mm.
Fixing system by angle iron or plate.
Accuracy: + 0,6 % EM |
 |
PDF |
HALL EFFECT TECHNOLOGY – CTPD-652 |
For survey of level or flow in the field of heating and industrial process.
Utilization for gases or liquids.
Measurement range: 0, +0.73, +1.45, +2.9, +7.25, +1.45 psi.
Output signal 4-20 mA 3 wires / Power supply 20-30 VDC or 24 VAC.
Housing in anodised aluminium or brass with plastic cap.
Diaphragm NBR or EPDM (viton or silicon on request).
Connection on internal terminal with screws.
Fixing system by angle iron (flat or perpendicular fixing).
Accuracy: 1,5 % EM. |
 |
PDF |
CERAMIC CELL TECHNOLOGY – CTPD-692 |
Due to wide variety, these sensors are suitable for most industrial applications.
Utilization for gases or liquids.
Measurement range: from 0 +1.45 psi to 0 +370 psi with admissible overload of 2 to 7,5 times the nominal pressure (according to EM).
Output signal 4-20 mA 2 wires /power supply 11-33 V.
Housing in stainless steel with fitting FPM / EPDM / NBR / MVQ / CR.
Connector DIN, ROND 3 poles, cable.
Ferrules for hoses or fittings to screw for tubes.
Fixing system by angle iron.
Accuracy: + 0,5 % EM. |
 |
PDF |